Kaman ThreadChecker Manuel d'utilisateur télécharger pdf (Page 9)

PART NO: 860510-001A Kaman Precision Products

Last Revised: 6/8/11 Measuring & Memory Systems

217 Smith Street

Middletown, CT 06457

www.kamansensors.com or 860-632-4442

Page 9 of 13

Push Button Switch Operation and User Configuration

Switch Operation Result

Holding the button down for longer than

one second

The status light starts blinking. On release it

acquires the air readings for all frequencies.

The next step is to put the sensor in a threaded

hole and press the button again. On release

the system will acquire a set of calibration data

for all frequencies for the threaded hole. The

last step is to put the sensor in a non-threaded

hole and press the button again. On release

the system will acquire data for all frequencies

for the non-threaded hole, optimize the sensor

frequency and modality, and set the limits.

Holding switch down during power up for

less than 10 seconds

Toggles between window comparator and level

comparator

Holding switch down during power up for

more than 10 seconds

Status LED will turn yellow and when the

switch is released it will toggle the Dwell

Enable (i.e. whether or not you are using the

derivative to check the limits)

Holding switch down for longer than 10

seconds (until the status light stops

blinking)

Limits are inverted

1 2 3 4 5 6 7 8 9 10 11 12 13

Pas de commentaire

Kaman ThreadChecker Manuel d'utilisateur Page 9